Company Name:
Contact Person:
E-Mail:
Tel:
Address:

My cranes working conditions are similar to belows.

Crane Properties
Q: 160 250 320 400 500 630 800 1,000 1,250 1,600 2,000 2,500 3,200 4,000 5,000 6,300 8,000 10,000 12,500 16,000 20,000 25,000 32,000 40,000 50,000 63,000 kg. Capacity.	A: m. Free Area. B: m. Total Height.	L: m. Outreach. H: m. Lifting Height.

Working Area
Indoor	Indoor-Outdoor	Outdoor

Jib Type
Pillar Type 360°	Pillar Type 270° (max)	Wall mounted Type

Crane Control
With pendant control hanging down the hoist.	With pendant control along arm length.	With remote control or push button control. (control is entirely free from the crane.)

Assembly Place
I do not have any place yet. Please give your advice.	I already have my foundation for crane assembly. (concrete or steel construction)	I already have my wall-mounted foundation. (concrete or steel construction)

Working Level
My crane will take loads from down up to loading level.	My crane will work at ground level.

Obstacles
Loads or obstacles are quite down below.	Loads or obstacles may be at critical level.	I certainly will have problems passing over the obstacles.

Load Spectrum
My crane usually is subjected to very small loads, and in exceptional cases only to maximum loads.	My crane usually is subjected to small or medium loads, but sometimes to maximum loads.	My crane usually is subjected to maximum or almost maximum loads.

Loading Traffic
My loading traffic is very low.	My loading traffic is moderate.	My loading traffic is very dense

Power Supply
V Hz Ph (My power supply)	My power supply is stable.	(-) V. (+) V. May not be stable.

Crane Will Work
At about sea level.	(+) m. High above sea level.	(-) m. Low below sea level.

Climate Condition
Normal	Rainy	so Hot	so Cold

Crane Will Work
In a dry and clean area.	In a wet/acidic vaporized area.	In explosive area.

Extra notes, specification and information of the customer :
ie: Type of your loads, type of your bulding, ceiling (steel, concrete, prefabric etc.).
Shape of ceiling (flat, curved, triangular etc.).
What do you think about the quality of your building and/or installation?
Is it strong enough for this job?
Do dimensions and tolerances suit to the related norms and standarts perfectly?
What are the most important points you require from the crane?

Please give your most competitive offer.
Please give alternative offers.
Please give your best suggestion.