Double Girder Overhead Crane Detailed Information Form for Customers

Company Name:
Contact Person:
E-Mail:
Tel:
Address:

Bayursan try to offer the best solution according to customers directives within the scope of this detailed information form.

Dimensions
R= m L1>= m L= m L2>= m h= mm b= mm A1= m A2= m B1 m B2 m P= m D= m H= m Hm= m C= m
Q	Capacity	kg.
	Q2: If you need second auxilary or main capacity (double hook)	kg.
H	Lifting Height (customer needs)	m.
Hm	Maximum lifting height (If there is an extra working area below reference level)	m.
C	Clearance	m.
L	Span	m.
LH	Bridge travel distance	m.
L1	Distance between rail center to left wall (min. 0.2m.)	m.
L2	Distance between rail center to right wall (min. 0.2m.)	m.
A1	Distance between console to ceiling.*	m.
A2	Height of console from the reference level. *	m.
R	Roof ridge heigth for inclined ceilings (triangular or curved)	m.
D	Console width	m.
B1	Approaching distance of hook to left wall (or column) (customer needs)	m.
B2	Approaching distance of hook to right wall (or column) (customer needs)	m.
P	Pendant (push button station) lift from the floor. (Std. 1.2m)	m.
	If you have runways
	For Steel Runways:
h	I profile height (mm)	mm.
b	I profile width (mm)	mm.
	Is there any steel sheet plate on consoles? (for concrete consoles)
	For Concrete Runways:
y	height (mm)	mm.
x	width (mm)	mm.
	Is there any steel sheet plate on runways? (for concrete runways)
	If you have rails on runways
x	Rail width (mm)	mm.
y	Rail height (mm)	mm.
z	Rail bottom flange width (mm) (for special crane rails)	mm.

N1	Number of consecutive columns at right hand side of the runways
N2	Number of consecutive columns at left hand side of the runways
LN	The maximum distance between two consecutive columns. (if colums are not equally distributed)	m.
* A = A1+A2 (A is the total heigth from ceiling down to reference level)

Speeds
	Normal Speeds	Slow Speeds
Bridge Travel Speeds	m/min.	m/min.
Trolley (cat, crab) Travel Speeds	m/min.	m/min.
Hook Lifting Speeds	m/min.	m/min.
Auxilary Hook (or 2nd main hook) Lifting Speeds*	m/min.	m/min.
2nd Trolley Travel Speeds **	m/min.	m/min.
* Auxilary hook can be on the same trolley(1st) ** Auxilary hook can be on the 2nd trolley

Power Control
My Power Supply
	V Hz Ph
	My power supply is stable.
	My power supply may not be stable. (- V. + V.)
My Crane Control
	With pendant control hanging down the hoist.
	With pendant control hanging down the streched wire rope and cable system *
	With pendant control hanging down the c-rails and flat cable system. *
	With remote control.**
* Control is free from the trolley along the bridge (for overhead cranes) Control is free from the trolley along the railway (for monorail cranes) ** Control is entirely free from the crane.

Others
Choices for colors
Hoist Unit Color
If color is not important for you check in the box
Please prefer colors by enumerating from our standard colors. (at least 2 preferences)
RAL 1023 Yellow	RAL 3020 Red	RAL 5015 Blue	RAL 6018 Green

Special suggestions (optional):

Bridge Color
If color is not important for you check in the box
Please prefer colors by enumerating from our standard colors. (at least 2 preferences)
RAL 1023 Yellow	RAL 3020 Red	RAL 5015 Blue	RAL 6018 Green

Special suggestions (optional):

Extra notes, specification and information of the customer :
ie: Type of your loads, type of your bulding, ceiling (steel, concrete, prefabric etc.).
Shape of ceiling (flat, curved, triangular etc.).
What are the most important points you require from the crane?
What do you think about the quality of your building and/or installation?
Is it strong enough for this job?
Do dimensions and tolerances suit to the related norms and standarts perfectly?

Please give your most competitive offer.
Please give alternative offers.
Please give your best suggestion.